3M™ Scotch-Weld™ DP6310NS

• 1:1 mix ratio by volume
• Non-sag rheology
• 9-minute work life

3M™ Fastbond™ 2000NF

• Quick bonding without heat
• Immediate handling strength.
• Post-formable and heat resistant

3M™ Scotch-Weld™ Structural Polyurethane Adhesive DP609

• Rapid room-temperature curing
• Flexible structural bonding
• Approx. 9-minute work life at 23°C

3M™ Scotch-Weld™ Urethane Adhesive DP6330NS

• 1:1 mix ratio
• 15-minute work life
• Non-sag rheology

3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP8010

• Ability to structurally bond polyolefins without special surface preparation
• Excellent water and humidity resistance
• One step process

3M™ Foam Fast Spray Adhesive 74

• Used for bonding flexible urethane or latex foam
• Provides excellent coverage.
• Soft, non-dimpling glue lines.

3M™ Repositionable Spray Adhesive 75

• Provides "tape-like" bonds
• Bonds paper, cardboard, acetate, foil, fabrics, etc.
• Extra-long tack range

3M™ Super 77™ Universal Spray Adhesive

• High tack
• High coverage
• Fast drying

3M™ Hi-Strength 90 Spray Adhesive

• High strength
• Contact-type adhesive
• Fast-drying

3M™ Citrus-Based Industrial Cleaner

• No chlorinated or petroleum-based solvents
• Gentle cleaning
• Fresh citrus scent

3M™ Double Sided Tape 9191

• Rubber Pressure Sensitive Adhesive
• Double Sided Tape
• High - Tack

3M™ Transfer Tape 465

• Acrylic Adhesive
• Excellent adhesion to paper stocks
• Kraft Release Liner

3M™ Double Sided Tape 415

• Double Sided Acrylic Adhesive
• Good adhesion to various substrates
• Excellent for indoor / outdoor applications

Scotch® ATG Transfer Tape 904

• Adhesive Transfer Tape
• No Carrier Film
• Clean and instant bonding

Scotch® ATG Transfer Tape 924

• Thin 0.002 in. (0.05 mm) profile for low-profile bonding
• Reverse wound construction for use with ATG hand-held dispensers
• Provides consistent and controlled adhesive application

Scotch® ATG Transfer Tape 926

• Provides immediate and permanent bonds with high adhesion
• Excellent performance up to 450 ºF (232 ºC)
• Adheres to a variety of substrates (ABS, acrylic, PP, PE, etc.)

Scotch® ATG Transfer Tape 969

• Provides immediate and permanent bond
• Designed to adhere to a variety of substrates
• Conforms easily to curves and contours

3M™ Double-Sided Paper Tape 9086

• Bonds to a wide variety of substrates
• 0.5 mil tissue carrier
• Double coated with 3.5 mil adhesive on each side

3M™ Transfer Tape 9485PC

• Utilizes a fiber-reinforced adhesive for roll stability
• Resistance to humidity, water, solvent, and chemicals
• The 5 mil (127µm) thick version of 3M™ Adhesive Transfer Tape 9482PC

3M™ Removable and Repositionable Double-Sided Tape 9415PC

• Features a removable, repositionable, low-tack adhesive
• Withstands temperatures as low as -20 °F (-29 °C) and as high as 158 °F (70 °C)
• Ideal for temporary mounting of lightweight materials

3M™ VHB™ Transfer Tape F9473PC

• Transparent, double sided, 10 mil (0.26 mm) VHB™ transfer tape
• Short term temperature tolerance of up to 500 °F (260 °C)
• Operating temperature tolerance of up to 300°F (149°C)

3M™ VHB™ Tape 4910F

• Clear Double Sided Tape
• Acrylic Adhesive
• Permanent Bonding for High Surface Energy Substrates

3M™ VHB™ Tape 4912F

3M™ VHB™ Tape 4991F

• High-strength bonding
• Conformable foam core
• Multi-purpose adhesive

3M™ Double Sided Urethane Foam Tape 4026

• Provides strong holding power for long-term performance
• Maintains bond integrity under elevated temperatures
• Adapts to uneven or irregular surfaces

3M™ Double Sided Urethane Foam Tape 4032

• Provides durable, long-term holding power
• Flexible and conformable for bonding on irregular surfaces
• Foam structure reduces vibration and enhances stability

3M™ Double Sided Foam Tape 9528

• Rubber adhesive delivers quick “grab” for fast bonding
• Adhesive on both sides for easy mounting and joining
• Provides light conformability and consistent thickness

3M™ VHB™ Tape GPH-110GF

• High Temperature Performance (Up to 230°C)
• Permanent seal against water, moisture, etc.
• 1.1 mm thickness

3M™ VHB™ Tape GPH-160GF

• High Temperature Performance (Up to 230°C)
• 1.6 mm thickness
• Permanent seal against water, moisture, etc.

3M™ VHB™ Tape GPH-060GF

• High Temperature Performance (Up to 230°C)
• 0.6 mm thickness
• Permanent seal against water, moisture, etc.

3M™ VHB™ Tape 5925F

• Double sided acrylic foam tape
• 0.6 mm thickness
• Excellent adhesion to multiple substrates

3M™ VHB™ Tape 5962F

• Double sided acrylic foam tape
• 1.6 mm thickness
• Bonding to multiple substrates

3M™ Dual Lock™ Resealable Snap Tape SJ3540

• Black, interlocking mushroom-shaped heads (250 stem density per square inch)
• Mates with Type 170, Type 250 or Type 400 stem densities
• Strong fastener secures with an audible snap, verifying closure

3M™ Dual Lock™ Reclosable Snap Tape SJ3550CF

• Black, interlocking mushroom-shaped heads (250 stem density per square inch)
• Mates with Type 170, Type 250 or Type 400 stem densities
• Clear, acrylic, tape bonds well to a variety of substrates

3M™ Dual Lock™ Resealable Snap Tape SJ3560

• Clear, interlocking mushroom-shaped heads (250 stem density per square inch)
• Mates with Type 170, Type 250 or Type 400 stem densities
• Clear, acrylic, tape bonds well to a variety of substrates

3M™ Dual Lock™ Resealable Click Strap SJ3870

• Black, interlocking mushroom-shaped heads (250 stem density per square inch)
• Mates with Type 170, Type 250 or Type 400 stem densities
• Black, modified acrylic

3M™ Dual Lock™ Resealable Snap Tape SJ3540D

• Black, interlocking mushroom-shaped heads (250 stem density per square inch)
• Mates with Type 170, Type 250 or Type 400 stem densities
• Features good temperature resistance of 120°F (49°C)

3M™ Dual Lock™ Resealable Snap Tape SJ3551CF

• Black, interlocking mushroom-shaped heads (400 stem density per square inch)
• Mates with Type 170 and Type 250 stem densities
• Strong fastener secures with an audible snap

3M™ Dual Lock™ Resealable Snap Tape SJ387B

• Black, interlocking mushroom-shaped heads (250 stem density per square inch)
• Mates with Type 170, Type 250 or Type 400 stem densities
• Strong fastener secures with an audible snap, verifying closure

3M™ Resealable Loop and Hook Fastener SJ352D

• Provide a firm adhesive bond to a wide variety of surfaces
• Durable for thousands of closures
• Best suited for indoor use

Scotch® ATG Transfer Tape Gun ATG700

• Automatic liner rewind minimizes waste and eliminates cleanup
• One-handed, trigger-controlled operation supports fast and consistent application
• Delivers uniform adhesive thickness without oozing, glue lines, or overspray

3M™ Scotchcast™ 260 Epoxy Powder Resin

• Fast curing
• Excellent electrical properties
• Excellent flow • UL 1446 Electrical Insulation System (EIS) approval at class 120(E), 130(B), 155(F), and 180(H)

3M Electrically Conductive Double-Sided Tape 9793KW Series

• 0.02-0.20 ohm under 3M ETM-12 test conditions
• Typical expected shielding effectiveness of 40-60 dB
• Broad thickness and adhesion selection

3M Electrically Conductive Double-Sided Tape 9793KT Series

• Typical Z-axis electrical resistance`
• Typical expected shielding effectiveness is 40-60 dB
• Ten thicknesses from 130 to 500 µm

3M EMI Absorber & Magnetic Shielding Material AB3000 Series

• Broadband 1-10 GHz EMI Absorption
• Configurable Thickness & Adhesive Options
• Die-Cuttable Sheet Format

3M 425 ALUMINUM FOIL TAPE

• Aluminum Backing with Acrylic Adhesive
• Great for Sealing
• Low Moisture Vapor Permeability

3M™ Scotch-Weld™ Structural Adhesive Film AF 30

• Thermosetting Structural Adhesive Film
• 5, 10, and 12 mil Thicknesses
• Flexible Extremely-Low-Flow Film

3M™ Scotch-Weld™ Structural Adhesive Film AF 3109-2U

• High-Strength Structural Bonding
• High- and Moderate-Tack Film Options
• 60-Minute 250 deg F Cure

3M 1099

• Medium-Viscosity Application Control
• Long-Term Durability by Resisting Weathering
• Adhesion-Promoting Surface Treatment

3M 1357

• High Initial Contact Strength
• High Heat Resistance
• Up to 30-Minute Bonding Window

3M 30NF

• Water-Dispersed Contact Adhesive
• Heat-Resistant Laminate Bonding
• Greenguard-Certified Wood and Laminate Bonding

3M 427

• Dead-Soft Aluminum Foil Backing
• Moisture-Barrier Tape Applications
• -54 to 149 deg C Temperature Resistance

3M 467 MP

• 0.06 mm Thin Adhesive Construction
• Peel and Shear on High-Energy Surfaces
• Up to 204 deg C Short-Term Exposure

3M 4926

• Conformable 0.4 mm Acrylic Foam
• Multi-Purpose Acrylic Adhesive
• 620 Kpa Overlap Shear Strength

3M 550FC

• One-Component Fast Moisture Cure
• High Tensile Strength and Modulus
• Water and Salt-Spray Resistance

3M 76

• High-Tack Industrial Formulation Excels in One-Surface Bonding
• Polyethylene and Polypropylene Bonding
• Controlled Variable Lace Spray Pattern

3M 8417

• Transparent Self-Wound Polyester Film
• Edge-Tear-Resistant Film Backing
• -40 to 93 deg C Exposure Range

3M 853

• 0.06 mm Thin Tape Construction
• Solvent-Resistant Tape Adhesive
• Transparent Label-Protection Tape

3M 950

• 5 mil Adhesive 300 Construction
• High Initial Adhesion and Holding
• Multi-Substrate Pressure-Sensitive Bonding

3M 966

• Up to 232 deg C Short-Term Exposure
• 10,000-Minute Static Shear
• Metal and High-Energy-Plastic Bonding

3M CA40H

• Higher-Viscosity Controlled Dispensing
• EPDM, Vinyl, and Aluminum Bonding
• Alignment-Friendly Slower Set Time

3M DP604NS

• 4-Minute Open Time
• 1:1 Meter-Mix Processing
• 51 to 121 deg C Service Range

3M DP620NS

• 20-Minute Open Time
• 1:1 Meter-Mix Processing
• 19.9 MPa Aluminum Lap Shear

3M DP640

• 40-Minute Working Window
• Thixotropic Non-Sag Placement
• 2,160 lb/in^2 Aluminum Overlap Shear

3M 05096

• Fine Small-Defect Filling
• Smooth Feathered Edges
• Low-Shrinkage Spot Repair

3M 08463

• One-Hour Full Cure
• Closed-Cell Cavity Filling
• Direct Static-Mix Application

3M 08681

• No-Activator One-Part Primer
• Ten-Minute Drying Time
• Multi-Interface Auto Glass Priming

3M 08690

• Fast Strength Build-Up
• High-Viscosity Bead Control
• One-Part Moisture Cure

3M 1181

• Conductive Adhesive Path
• 66 dB Average Shielding
• Solderable Die-Cut Construction

3M 1205

• 155 deg C Continuous Operation
• 6000 V Dielectric Minimum
• Coil and Solder-Mask Versatility

3M 1267

• Embossed Z-Axis Contact
• 64 dB Average Shielding
• Lined Die-Cut Handling

3M 130C

• Self-Fusing Linerless Insulation
• High Dielectric Strength
• 69 kV Splicing Scope

3M 1357L

• Low-Viscosity Large-Area Application
• Fast Ten-Minute Drying
• Thirty-Minute Bonding Range

3M 201

• Rubber-based adhesive
• Conformable crepe paper backing
• Short-term heat resistance

3M 205

• Fast Contact-Type Adhesion
• Lift-Resistant Paint Masking
• Multiple Paint-System Compatibility

3M 2084

• One-Part No-Mix Application
• Five-Minute Tack-Free Time
• Flexible Fluid-Resistant Seal

3M 218

• Crisp Fine-Line Separation
• Solvent and Moisture Resistance
• Bake-Cycle Heat Resistance

3M 226

• Chemical-Resistant Surface Protection
• Three-Month Outdoor Clean Removal
• Quick-Stick Hand-Tearable Handling

3M 231/231A

• Instant-Adhesion Paint Masking
• Clean Multiple-Bake Removal
• Conformable Mini-Crepe Backing

3M 232

• Immediate High-Hold Adhesion
• Clean Medium-Temperature Removal
• One-Piece Sliver-Resistant Handling

3M 233

• Conformable Automotive Paint Masking
• Defined ASTM Physical Strength
• Short High-Temperature Exposure

3M 2460

• Low-Ridge Precision Paint Lines
• Delicate-Surface Low-Peel Handling
• Twenty-One-Day Outdoor Removal

3M 2517

• General-Purpose Web Splicing
• Versatile Hand-or-Machine Handling
• Short High-Temperature Bake Cycles

3M 2929

• Moisture-Resistant Reinforced Backing
• Quick Hand-Tear Handling
• Fast Multi-Surface Contact

3M 298X

• Precision Fiber-Protrusion Control
• Lower Slurry Contamination
• MT Connector Polishing Fit

3M 301

• Clean One-Piece Removal
• Conformable Paint-Masking Control
• Defined 107 deg C Exposure

3M 305

• Instant Acrylic Carton Closure
• Split-Resistant BOPP Handling
• Cold-Temperature Packaging Use

3M 307EA

• Self-Renewing Abrasive Cut
• Conformable Contour Finishing
• Predictable Robotic Finish Quality

3M 3302

• Low-Resistance Conductive Bonding
• Conformable EMI/RFI Shielding
• UL 510 Recognized Construction

3M 33428

• Defined 80+ Abrasive Grade
• Seven-Inch Metalworking Coverage
• Compatible 7/8-Inch Mounting

3M 34383

• Hand-Tearable Foil Installation
• Vapor-Barrier Sealing Performance
• Broad -40 to 149 deg C Service

3M 3549

• Non-Sag Vertical Bonding
• Balanced 1:1 Mixing
• Tough Low-Temperature Flexibility

3M 363

• High-Tensile Reinforced Foil
• 316 deg C Continuous Service
• FAR 25.853(a) Requirements Met

3M 37852

• Reduced-Adhesive Floor Removal
• Fast Secure Surface Coverage
• Contaminant-Trapping Paint-Booth Protection

3M 3950

• Film Edge-Lift Protection
• Water-Tight Interface Sealing
• Defined 50-100 deg F Application

3M 401

• High-temperature performance
• Clean removal
• Comfortable crepe paper backing

3M 4016

• High-Shear Permanent Mounting
• Vibration-Damping Conformable Foam
• Protected 104 deg C Holding

3M 401M

• Fast High-Initial Substrate Grab
• Fast Hand-Tearable Process Handling
• Defined -40 to 65 deg C Service

3M 40PR

• Conductive Anti-Static Adhesion
• Visible Static-Control Identification
• 130 deg C Process Exposure

3M 4116

• Fast Initial Multi-Substrate Tack
• Breathable Contaminant-Trapping Seal
• High-Density Vibration Damping

3M 4200FC

• Fast Moisture-Cure Sealing
• Non-Sag Marine Application
• Flexible Bonds for Disassembly

3M 433L

• High-Temperature Heat Shielding
• Conformable Foil Surface Coverage
• Linered Tape for Die-Cutting

3M 444

• Fast Initial Lamination Adhesion
• Stable PET Converting Carrier
• Foam and Gasket Attachment

3M 4611

• High-Temperature Metal Bonding
• Immediate Handling Without Cure
• Firm Foam Fastener Replacement

3M 470

• Chemical-Resistant Plating Masks
• Conformable Irregular-Surface Coverage
• Clean-Removal Process Masking

3M 470L

• Linered Die-Cut Plating Masks
• Chemical-Resistant Process Protection
• Conformable Curved-Surface Masking

3M 471

• Conformable Irregular-Surface Marking
• Clean-Removal Paint Masking
• Vivid Abrasion-Resistant Identification

3M 4712

• Die-Cut Masking Conversion
• Stretch-Conformable Surface Coverage
• Clean-Removal Color Coding

3M 483

• Stretch-Conformable Irregular-Surface Sealing
• Low Water-Vapor Transmission
• Up to 12-Month Outdoor Removal

3M 4905

• Low-Visibility Permanent Fastening
• Immediate Contact-Bond Handling
• High-Strength HSE Substrate Bonding

3M 4950

• Immediate No-Cure Assembly Handling
• Firm 1.1 mm Foam Bonding
• High-Surface-Energy Permanent Attachment

3M 50

• All-Weather Pipe Corrosion Protection
• Conformable High-Tack Pipe Wrapping
• Primer-Controlled Metal Surface Adhesion

3M 510

• Conformable Diamond-Plate Slip Resistance
• Mineral-Coated High-Friction Walking Surface
• Soft-Mallet Irregular-Surface Conforming

3M 528

• Blasting-Media Impact Surface Protection
• Clean One-Piece Tape Removal
• Die-Cuttable Paper-Liner Masking Format

3M 540

• One-Part Moisture-Cure Joint Sealing
• Elastic >600% Elongation Profile
• 60 to 90 Minute Tack-Free Window

3M 560

• Single-Component Bond-and-Seal Application
• Elastic Moisture-Cured Assembly Bonding
• Panel and Body Bonding Fit

3M 583

• Controlled Electronic Film Bondlines
• Heat-and-Pressure Thermal Bonding
• PCB Glass-Fabric Splicing Fit

3M 5925

• Immediate Painted-Surface Bonding
• Conformable 0.6 mm Foam Attachment
• 93 deg C Long-Term Use

3M 5952

• 45-Mil Conformable Foam Bonding
• Painted-Surface Permanent Attachment
• Panel and Display Assembly Bonding

3M 598X.5MIC

• Fine Cerium Oxide Final Polishing
• Polyester Film for Controlled Finishing
• Fiber-Optic Ferrule Finishing Fit

3M 604NS

• Non-Sag Vertical Gap Filling
• Rapid 4-Minute Working Window
• Multi-Material Structural Bonding

3M 665

• Linerless Manual or Automated Dispensing
• Repositionable Mounting with Clean Removal
• Hot-Wire Cuttable Plastic Construction

3M 69

• High-Temperature Electrical Insulation
• Glass-Cloth Coil and Motor Wrapping
• No-Heat Adhesive Application

3M 70

• Instant Self-Fusing Cable Overwrap
• Class H High-Temperature Insulation
• Arc-Resistant High-Voltage Protection

3M 7445

• Gentle Super Fine Surface Cleaning
• Conformable Pad for Delicate Surfaces
• Rust-Free Steel Wool Alternative

3M 7447

• Very Fine Aluminum-Oxide Finishing
• Nonwoven Pad for Surface Preparation
• Cleaning, Blending and Light Deburring

3M 7448

• Ultra Fine Silicon-Carbide Finishing
• Conformable Access to Irregular Surfaces
• Load-Resistant Long-Life Open Web

3M 78

• EPS and Insulation Material Bonding
• Aerosol or Cylinder Spray Delivery
• Foundation and Foam-Core Applications

3M 784F

• Fast Medium-Pressure Metal Grinding
• Flexible Wet-or-Dry Belt Grinding
• Grinding Aid for Heat-Sensitive Alloys

3M 7880

• Dot-Matrix Printable Polyester Facestock
• Adhesion Across Metals and Plastics
• Moisture- and Chemical-Resistant Labeling

3M 79

• Stable Glass-Cloth Coil Insulation
• 600 V Electrical Tape Rating
• High-Temperature Motor and Transformer Use

3M 850

• Low-Caliper High-Strength Process Tape
• Quick-Stick Long-Hold Splicing
• Visible or Transparent Marking Options

3M 855

• Clean-Removal High-Temperature Masking
• Non-Silicone Adhesive for Repainting
• High-Elongation Composite Bagging Tape

3M 8561

• 14-Mil Indoor Erosion Protection
• Conformable Curved-Surface Tape Protection
• Paint-Compatible Removable Acrylic Adhesion

3M 8657DL

• Dual-Liner Aircraft Wet-Area Installation
• Tough Polyurethane Fluid-Barrier Protection
• 82 deg C Wet-Area Service

3M 865X

• Precision Silica Fiber-Optic Polishing
• Film-Backed Controlled Fine Lapping
• Multiple Formats for Polishing Sequences

3M 8671

• Outdoor UV-Resistant Edge Protection
• Acrylic Pressure-Sensitive Protective Layer
• Converted Formats for Leading Edges

3M 8672

• UV-Resistant Outdoor Surface Protection
• 8-Mil Conformable Erosion Barrier
• High-Peel Acrylic Surface Adhesion

3M 8681HS

• Polyurethane Leading-Edge Erosion Protection
• Conformable Curved-Surface Coverage
• High-Shear Acrylic Attachment

3M 890

• High-Strength Filament Reinforcement
• Heavy-Duty Bundling Support
• Industrial Splicing and Securing

3M 8934

• Glass-Reinforced Packaging Strength
• Minimal-Rubdown Package Reinforcement
• Transparent Reinforcement Preserves Graphics

3M 8979

• Six-Month Outdoor Clean Removal
• One-Year UV Exposure Resistance
• Hand-Tear Conformable Repairs

3M 898

• High-Tensile Filament Reinforcement
• Multi-Surface Synthetic-Rubber Adhesion
• Consistent Curl-Resistant Dispensing

3M 8992

• 204 deg C Process Masking
• Clean One-Piece Mask Removal
• Chemical-Process Masking Resistance

3M 8992L

• Linered Die-Cut Masking Format
• High-Temperature Silicone Masking
• Clean One-Piece Process Removal

3M 9082

• 177 deg C Long-Term Bonding
• Low-Outgassing Electronics Adhesion
• Thin 0.05 mm Transfer Layer

3M 90CA

• Fast Tack Spray Bonding
• Adjustable Lace Spray Pattern
• Broad Assembly Material Compatibility

3M 9379

• Thin Profile Transfer Bonding
• Clear Low Visibility Construction
• Fuel And Hydraulic Fluid Resistance

3M 9472

• High Tack Transfer Bonding
• Converter Friendly Fiber Reinforcement
• Broad Substrate Peel Performance

3M 9672

• High Tack Transfer Bonding
• Heavy Liner Converting Support
• Broad Substrate Peel Performance

3M 987C

• Efficient Stock Removal
• Stable Heavy Duty Backing
• Durable Resin Bonded Construction

3M A3-2

• Fast Handling Strength Development
• Controlled Non Sag Placement
• Oily Surface Process Tolerance

3M AC-130-2

• Non Chromated Metal Preparation
• Ambient Dry Process
• Brush Spray Or Immersion Application

3M AC-380

• Fuel Tank Sealing Performance
• Thixotropic Application Control
• Selectable Assembly Work Life

3M AC-730

• Non Chromated Corrosion Inhibition
• Flowable And Thixotropic Options
• Selectable Application Life Grades

3M AC-770-B-2-3

• Low Density Fuselage Sealing
• Controlled Thixotropic Placement
• Extended Class B Work Life

3M AF536

• Smooth Composite Surface Finish
• Optional Lightning Protection Conductor
• Drapeable Repositionable Layup

3M CV45F

• Conformable Panel Seam Bonding
• Immediate Pressure Sensitive Handling
• Stress Relaxing Acrylic Foam

3M DP605NS

• Tough Flexible Urethane Bond
• Five Minute Assembly Work Life
• Non Sag Placement Control

3M EC-1357

• Fast Interior Contact Assembly
• Positioning Time Before Contact
• Flexible Coating Method Selection

3M EC-3500

• Low Density Core Splicing
• Edge And Void Filling
• Multi Step Panel Assembly

3M EC-3515

• Lightweight Aerospace Void Filling
• Honeycomb Edge Sealing Control
• Flexible Ambient Or Heat Cure

3M EC-3532

• Tough Impact Resistant Assembly
• Rapid Non Sag Placement
• Primed Multi Material Bonding

3M EC-3549

• High Peel Structural Durability
• Impact Resistant Urethane Bonding
• Controlled Sag Resistant Placement

3M EC-3587

• Structural Bonding And Fairing
• Selectable Assembly Work Life
• Sandable Non Sag Gap Filling

3M EC-5816

• Flexible Abrasion-Resistant Protection
• Spray Brush or Flow Application
• 30-Minute Tack-Free Drying

3M ES-2000

• Clear High-Gloss Edge Seal
• Controlled 1:1 Duo-Pak Application
• 25-Minute Tack-Free Time

3M EZ250120

• Medium-Set Wood Assembly
• Thin-Bondline Warm Application
• Moisture-Curing One-Part Processing

3M EZ250150

• Extended 2 to 4 Minute Open Time
• Aluminum or Glass to Wood or Plastic
• Flexible Cured Adhesive Layer

3M PTFE5490

• Low-Friction Non-Stick Surface
• Flat Extruded PTFE Backing
• Clean-Removal Silicone Adhesive

3M RP2110

• Aircraft Erosion-Protection Repair
• Controlled 1:1 Cartridge Dispensing
• Ten-Minute Working Window

3M SJ3526N

• Quick Reclosable Hook Attachment
• Rubber PSA for Low-Energy Plastics
• Manual or Automated Installation

3M SJ3571

• Reclosable Loop Fastening
• Acrylic PSA Installation
• Configurable Roll Conversion

3M SJ5816

• Die-Cut Protective Conversion
• Skid-Resistant Polyurethane Cushioning
• High-Tack PSA Installation

3M TE031

• 30-Second Handling Strength
• Two-Minute Assembly Window
• Flexible Plastic Bonding

3M™ Scotch-Weld™ Acrylic Adhesive DP8507NS

• Toughened
• 10:1 mix ratio
• Excellent shear strength on bare metals, plastics and other materials

3M 08682

• Automotive Urethane Adhesion Primer
• Fast-Drying No-Activator Processing
• UV-Blocking Corrosion-Protection Primer

3M 1218

• 180 deg C Continuous Operation
• Thin High-Temperature Insulation
• Flexible-Circuit Cover Layer

3M AB7000E Series

• 300 MHz-4 GHz operating range
• With or without adhesive
• -25 to 105°C temperature range

3M™ Hot Melt Adhesive 3748 V0

• Excellent adhesion
• Good electrical properties
• Non-corrosive to metal

3M 5413

• Kapton Polyimide Backing
• High-Temperature Silicone Adhesive
• -73 to 260 deg C Use Range

3M 3901

• Low-Viscosity Surface Wetting
• Quick-Drying One-Component Application
• Improved Metal Corrosion Protection

3M AB8000 Series

• Documented near-field EMI absorption from 300 MHz to 4 GHz.
• Four WO magnetic-layer thicknesses from 0.1 to 0.5 mm
• Typical -40 to 150°C temperature range

3M™ Hot Melt Adhesive 3748

• High peel
• High temperature performance
• Formulated for bonding low surface energy plastics and coatings

3M 4298UV

• Fast 30-to-90-Second Drying
• Fluorescent Coverage Verification
• Multiple Application Methods

3M™ Hot Melt Adhesive 3762LM

• 100% solids, no VOCs
• Easy to use
• Fast-setting adhesive obtains strength in seconds

3M EC-3901

• Metal And Glass Surface Priming
• Improved Metal Corrosion Protection
• Clean Surface Oxidation Protection

3M™ Scotch-Weld™ Structural Acrylic Adhesive DP8005

• Room Temperature Cure
• Excellent Water and Humidity Resistance
• Very Good Chemical Resistance

3M™ Hot Melt Adhesive Gun Quadrack™

• Palm trigger reduces hand fatigue during extended dispensing sessions
• Lightweight at 10 oz with glass-reinforced nylon body for industrial durability
• Quadrack feed system accepts 5/8" x 8" Q-size sticks to reduce reloading frequency

3M 92

• Polyimide Film with Silicone Adhesive
• 6,000 V Dielectric Breakdown
• UL-Recognized Flame-Retardant Tape

3M EC-3924

• Bondline Corrosion Protection
• Spray Brush or Roller Application
• Controlled Film and Bake Process

3M™ Adhesion Promoter 111

• Higher bond strength.
• Isopropyl alcohol based solvent system
• Non-offensive odor

3M 3747

• Dissimilar-Substrate Hot-Melt Bonding
• Rapid Strength Development in Seconds
• 45-Second Open Time

3M™ Scotch-Weld™ Structural Adhesives Primer EW-5000

• Water Based Epoxy Primer
• Spray Surface Preparation Application
• 0.18 to 0.28 MIL Thickness

3M DP8610NS

• Flexible Dissimilar Material Bonding
• Non Sag Bondline Control
• Fast Handling Strength Development

3M™ Tape Primer 94

• Enhances adhesion of 3M tapes
• Ideal for low surface energy materials
• Improves bond strength, consistency, and long-term durability

3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP810

• Tough, durable bonds
• Minimal surface prep
• Excellent shear and peel strength

3M™ VHB™ Surface Cleaner

• Effective degreasing formulation
• For preparation of surfaces for bonding
• Composed of 90% isopropyl alcohol and 10% distilled water

3M 3747PG

• Fast Seconds-Scale Bond Set
• Moderate 63 deg C Heat Resistance
• Versatile Plastic-to-Wood Bonding

3M™ Scotch-Weld™ DP460

• High shear strength
• 60-minute work life
• Easy mixing

3M 3764AE

• Fast Cool-Set Assembly Bonding
• 50-Second Positioning Window
• Low-Temperature Flexible Bond

3M™ Scotch-Weld™ DP410

• Fast-setting
• Toughened formulation
• Convenient 2:1 mix ratio

3M 3764-Q

• Quadrack-Format Controlled Dispensing
• Rapid Seconds-Scale Bond Development
• Flexible Impact-Resistant Bond

3M 251

• Balanced One-to-One Mixing
• Defined Oven-Cure Handling
• Rigid Class F Insulation

3M™ Scotch-Weld™ Low Odor Acrylic Adhesive DP8810NS

• Toughened
• Excellent shear strength
• High peel and impact strength

3M 280

• Low-Viscosity Fine-Wire Impregnation
• Semiflexible Cured Performance
• Class F Electrical Insulation

3M 281

• Class F (155 deg C) Temperature Rating
• Thermally Conductive Encapsulation
• Upgraded Structural Characteristics

3M 282

• Thixotropic Low-Sag Application
• Multi-Method Resin Placement
• Semiflexible Class F Performance

3M DP270

• Low-Viscosity Electronic Potting
• 70-Minute Working Window
• Low-Shrinkage Rigid Encapsulation

3M™ Scotch-Weld™ 420

• Bonds metals, composites, glass, ceramics, plastics, and wood
• 20-minute work life at 72°F (22°C) for positioning and alignment before cure
• Handling strength in approximately 2 hours; full cure in 24 hours at room temperature

3M™ Scotch-Weld™ Epoxy Adhesive DP490

• 90-minute work life supports complex assembly positioning and alignment
• Maintains bond strength across high- and low-temperature operating conditions
• Bonds metals, composites, glass, ceramics, plastics, and wood

3M™ Scotch-Weld™ DP100

• Easy mixing
• High flow
• Fast cure

3M 1300L

• Brush or Spray Application
• High Immediate Strength and Heat Resistance
• Metal, Rubber, and Wood Bonding

3M™ Scotch-Weld™ Epoxy Adhesive DP125

• 25-minute worklife
• Flexible
• High peel and shear strength

3M 847

• Medium-Viscosity Application Control
• Fuel and Oil Resistance
• Adhesion-Promoting Surface Treatment

3M™ Scotch-Weld™ Epoxy Adhesive 7240 FR

• Long open time for large surface application
• Non-sag properties
• Contains glass beads for thickness control

3M™ Scotch-Weld™ Epoxy Adhesive DP100FR

• Fast cure
• Easy mixing
• • Meets UL 94 V-0

3M™ Scotch-Weld™ Epoxy Adhesive DP100 Plus

• 2-5 minute work life
• Good shear and excellent peel strength
• Flexible

3M 760 UV

• High-Modulus, High Shore-a Hardness Formulation
• Moisture-Cure Sealing Processing
• Isocyanate-Free, Low VOC Formulation

3M™ Scotch-Weld™ Epoxy Adhesive DP110

• Controlled flow
• 20-minute handling strength
• Good adhesion to many plastics and metals

3M™ Scotch-Weld™ Epoxy Adhesive DP190

• 90-minute work life
• 1:1 mix ratio
• High shear and peel strength

3M™ Scotch-Weld™ Epoxy Adhesive 7260FC NS

• Toughened formulation
• Cures at room temperature or accelerated at up to 65 °C
• Working time of 90 minutes

3M™ Scotch-Weld™ Epoxy Adhesive 7288

• Two-part A/B epoxy system
• High durability
• Strong adhesion to metals and thermoset plastics

3M™ Scotch-Weld™ Epoxy Adhesive DP760

• 2:1 mix ratio
• Non sagging paste
• High temperature resistance

3M™ Static Mixing Nozzle

• Available for 50 mL and 200 mL / 400 mL cartridge formats
• Doubles as a cartridge storage cap between uses
• Automatic ratio metering through passive cascade mixing

3M™ Scotch-Weld™ EPX Mixing Nozzle

• Simultaneous metering, mixing, and application in one step
• Used nozzle doubles as a cartridge storage seal between uses
• Compatible with 3M EPX manual and pneumatic applicators

3M 08001

• Flexible Waterproof Bond
• Tube-Ready Brush Application
• Vibration-Resistant Gasket Repairs

3M™ Scotch-Weld™ EPX™ Standard Mixing Nozzle

• Genuine 3M accessory engineered for compatibility with EPX applicators and Duo-Pak cartridges
• Available in configurations for both small-format and larger cartridge systems
• Disposable design eliminates cleanup associated with manual mixing tools

3M 1300

• Four Minute Dry-To-Touch Time
• Up to 12-Minute Bonding
• Rubber-to-Rigid Substrate Bonding

3M™ Scotch-Weld™ EPX Manual Applicator

• No power source required for portable and in-field operation
• Conversion kits allow support for multiple mix ratios using a single applicator body
• Dual-drive mechanism maintains a consistent mix ratio throughout the dispensing stroke

3M 4799

• Flexible EPDM and Rubber Bonding
• Spray, Brush, or Roll Application
• Heat- and Water-Resistant Bond

3M™ Scotch-Weld™ EPX Pneumatic Application Gun

• Drip-free dispensing helps minimize material waste and surface contamination
• Integrated regulator enables precise control of adhesive flow rate
• Air-driven dual-piston system maintains accurate mix ratio throughout dispensing

3M™ Scotch-Weld™ EPX Structural Adhesive Plunger

• Engineered to precise tolerances for accurate and consistent mix ratio delivery
• Applies even pressure across both cartridge chambers during dispensing
• Enables the EPX Plus II applicator to support multiple cartridge mix ratios

3M™ Scotch-Weld™ Structural Adhesive Film AF 163-2

• Preformed Epoxy Film
• Multiple Product Configurations
• Vacuum Curing Capability

3M™ Scotch-Weld™ Structural Adhesive Film AF 163-2 OST Version

• High Structural Bond Strength
• High Fracture Toughness and Peel Strength
• Low-Pressure and Vacuum Curing

3M MR283FO75

• Filled, semi-flexible epoxy system
• Low mixed viscosity
• Multiple oven-cure

3M DP8625NS

• Flexible Dissimilar Material Bonding
• Controlled Non Sag Dispensing
• Extended Panel Assembly Window

3M 2158

• High-Strength Structural Bonding
• 120-Minute Working Window
• 1:1 Meter-Mix Processing

3M 2214

• 82 to 177 deg C Service Range
• One-Part Non-Sag Paste
• Multi-Substrate High-Adhesion Bonding

3M 2216NS

• Flexible Shock/Vibration/Thermal-Cycling Resistance
• High Peel and Shear Strength
• Visual Two-Part Mix Confirmation

3M DP100NS

• 15 to 20-Minute Working Window
• Paste Consistency for Bonding
• Machinable Cured Bonding

3M DP105

• Retains Its Clear
• Flexible Cured Adhesive
• 4-Minute Working Window

3M DP420NS

• High-Strength Structural Bonding
• Toughened Epoxy Bonding
• Non-Sag Placement Control

3M DP460NS

• Non-Sag Placement Control
• 60-Minute Working Window
• High Shear and Peel Strength

3M 8N

• Low-Viscosity Electrical Encapsulation
• Room-Temperature Epoxy Cure
• Semi-Flexible 68 Shore D

Scotch-Brite™ Roloc™ SC Surface Conditioning Disc

• Conformable Nonwoven Construction
• Loading Resistance Material
• Quick-Change Attachment System

3M 1838

• Controlled-Flow Structural Bonding
• One-Hour Positioning Window
• Rigid High-Shear Performance

3M 3024

• High Honeycomb-Gap Expansion
• Flexible 121-176 deg C Cure
• Low-Sag Core Splicing

3M AF126

• Low Temperature Cure Option
• Low Pressure Structural Bonding
• Selectable Film Weight Construction

3M AF126-2

• Low Temperature Cure
• Controlled Low Flow Processing
• Clean Low Tack Layup

3M AF126-3

• Low Temperature Cure
• Controlled Low Flow Processing
• Green Supported Film Handling

3M AF163-2L.0303M

• Lightweight Nonwoven Carrier
• Defined Thin Film Construction
• Low Pressure Cure Capability

3M AF163-2OST

• One Side Tack Layup
• Nonwoven Carrier Handling
• Selectable Bondline Construction

3M AF3028

• Expandable Core Splice Filling
• Low Sag Cure Behavior
• Wide Temperature Structural Performance

3M AF325LS.59

• Integrated Composite Surfacing Layer
• Smooth Low Porosity Finish
• Configuration Specific Lightning Protection

3M AF42

• Clear Structural Bondline
• Clean Non Tack Layup
• High Peel Toughened Film

3M DP460EG

• Long Work Life Assembly
• Low Outgassing Electronics Bonding
• Toughened Structural Epoxy

3M EC-1751

• Metal Repair And Void Filling
• Controlled Thick Paste Placement
• Flexible Ambient Or Heat Cure

3M EC-1838

• Controlled Flow Structural Placement
• One Hour Assembly Work Life
• Durable Environmental Bonding

3M EC-2214

• Premixed One Part Processing
• Heat Cured Structural Bonding
• Application Specific Grade Selection

3M EC-2216

• Flexible Vibration Resistant Bonding
• High Peel Structural Performance
• Selectable Formulation Processing Window

3M EC-2615

• Tough Impact Resistant Bonding
• High Shear And Peel Performance
• Non Sag Assembly Control

3M EC-2815

• Flame Retardant Interior Bonding
• Controlled Honeycomb Insert Placement
• Extended Aerospace Assembly Window

3M EC-3439

• Low Density Core Reinforcement
• Extended One Part Shop Life
• High Temperature Cured Performance

3M EC-3501

• Rapid Structural Repair Bonding
• Controlled Composite Defect Filling
• High Room Temperature Shear

3M EC-3542

• Flame Retardant Interior Assembly
• Low Density Insert Bonding
• Controlled Non Sag Work Life

3M EC-9300

• Five-Hour Assembly Work Life
• Room-Temperature or Mild-Heat Cure
• Qualified Aircraft Interior FST Data

3M TC-2707

• Thermally Conductive Bonding
• 60-Minute Working Window
• Low-Viscosity Gap Filling

3M TC-2810

• Thermally Conductive Insulation
• Extended Assembly Work Life
• Pre-Assembly Tack and Gap Fill